x86doc › CVTSI2SS - Convert Doubleword Integer to Scalar Single Precision Floating-Point Value

Opcode/Instruction | Op /En | 64/32 bit Mode Support | CPUID Feature Flag | Description |
---|---|---|---|---|

F3 0F 2A /r CVTSI2SS xmm1, r/m32 | A | V/V | SSE | Convert one signed doubleword integer from r/m32 to one single precision floating-point value in xmm1. |

F3 REX.W 0F 2A /r CVTSI2SS xmm1, r/m64 | A | V/N.E. | SSE | Convert one signed quadword integer from r/m64 to one single precision floating-point value in xmm1. |

VEX.LIG.F3.0F.W0 2A /r VCVTSI2SS xmm1, xmm2, r/m32 | B | V/V | AVX | Convert one signed doubleword integer from r/m32 to one single precision floating-point value in xmm1. |

VEX.LIG.F3.0F.W1 2A /r VCVTSI2SS xmm1, xmm2, r/m64 | B | V/N.E.^{1} |
AVX | Convert one signed quadword integer from r/m64 to one single precision floating-point value in xmm1. |

EVEX.LLIG.F3.0F.W0 2A /r VCVTSI2SS xmm1, xmm2, r/m32{er} | C | V/V | AVX512F | Convert one signed doubleword integer from r/m32 to one single precision floating-point value in xmm1. |

EVEX.LLIG.F3.0F.W1 2A /r VCVTSI2SS xmm1, xmm2, r/m64{er} | C | V/N.E.^{1} |
AVX512F | Convert one signed quadword integer from r/m64 to one single precision floating-point value in xmm1. |

**NOTES:**

1. VEX.W1/EVEX.W1 in non-64 bit is ignored; the instructions behaves as if the W0 version is used.

Op/En | Tuple Type | Operand 1 | Operand 2 | Operand 3 | Operand 4 |
---|---|---|---|---|---|

A | N/A | ModRM:reg (w) | ModRM:r/m (r) | N/A | N/A |

B | N/A | ModRM:reg (w) | VEX.vvvv (r) | ModRM:r/m (r) | N/A |

C | Tuple1 Scalar | ModRM:reg (w) | EVEX.vvvv (r) | ModRM:r/m (r) | N/A |

Converts a signed doubleword integer (or signed quadword integer if operand size is 64 bits) in the “convert-from” source operand to a single precision floating-point value in the destination operand (first operand). The “convert-from” source operand can be a general-purpose register or a memory location. The destination operand is an XMM register. The result is stored in the low doubleword of the destination operand, and the upper three doublewords are left unchanged. When a conversion is inexact, the value returned is rounded according to the rounding control bits in the MXCSR register or the embedded rounding control bits.

128-bit Legacy SSE version: In 64-bit mode, Use of the REX.W prefix promotes the instruction to use 64-bit input value. The “convert-from” source operand (the second operand) is a general-purpose register or memory location. Bits (MAXVL-1:32) of the corresponding destination register remain unchanged.

VEX.128 and EVEX encoded versions: The “convert-from” source operand (the third operand) can be a general-purpose register or a memory location. The first source and destination operands are XMM registers. Bits (127:32) of the XMM register destination are copied from corresponding bits in the first source operand. Bits (MAXVL-1:128) of the destination register are zeroed.

EVEX encoded version: the converted result in written to the low doubleword element of the destination under the writemask.

Software should ensure VCVTSI2SS is encoded with VEX.L=0. Encoding VCVTSI2SS with VEX.L=1 may encounter unpredictable behavior across different processor generations.

**VCVTSI2SS (EVEX Encoded Version)**

IF (SRC2 *is register*) AND (EVEX.b = 1) THEN SET_ROUNDING_MODE_FOR_THIS_INSTRUCTION(EVEX.RC); ELSE SET_ROUNDING_MODE_FOR_THIS_INSTRUCTION(MXCSR.RC); FI; IF 64-Bit Mode And OperandSize = 64 THEN DEST[31:0] := Convert_Integer_To_Single_Precision_Floating_Point(SRC[63:0]); ELSE DEST[31:0] := Convert_Integer_To_Single_Precision_Floating_Point(SRC[31:0]); FI; DEST[127:32] := SRC1[127:32] DEST[MAXVL-1:128] := 0

**VCVTSI2SS (VEX.128 Encoded Version)**

IF 64-Bit Mode And OperandSize = 64 THEN DEST[31:0] := Convert_Integer_To_Single_Precision_Floating_Point(SRC[63:0]); ELSE DEST[31:0] := Convert_Integer_To_Single_Precision_Floating_Point(SRC[31:0]); FI; DEST[127:32] := SRC1[127:32] DEST[MAXVL-1:128] := 0

**CVTSI2SS (128-bit Legacy SSE Version)**

IF 64-Bit Mode And OperandSize = 64 THEN DEST[31:0] := Convert_Integer_To_Single_Precision_Floating_Point(SRC[63:0]); ELSE DEST[31:0] :=Convert_Integer_To_Single_Precision_Floating_Point(SRC[31:0]); FI; DEST[MAXVL-1:32] (Unmodified)

VCVTSI2SS __m128 _mm_cvti32_ss(__m128 s, int a);

VCVTSI2SS __m128 _mm_cvt_roundi32_ss(__m128 s, int a, int r);

VCVTSI2SS __m128 _mm_cvti64_ss(__m128 s, __int64 a);

VCVTSI2SS __m128 _mm_cvt_roundi64_ss(__m128 s, __int64 a, int r);

CVTSI2SS __m128 _mm_cvtsi64_ss(__m128 s, __int64 a);

CVTSI2SS __m128 _mm_cvtsi32_ss(__m128 a, int b);

Precision.

VEX-encoded instructions, see Table 2-20, “Type 3 Class Exception Conditions.” |

EVEX-encoded instructions, see Table 2-48, “Type E3NF Class Exception Conditions.” |