BNDMOV—Move Bounds

Opcode/Instruction Op/En 64/32 bit Mode Support CPUID Feature Flag Description
66 0F 1A /r BNDMOV bnd1, bnd2/m64 RM NE/V MPX Move lower and upper bound from bnd2/m64 to bound register bnd1.
66 0F 1A /r BNDMOV bnd1, bnd2/m128 RM V/NE MPX Move lower and upper bound from bnd2/m128 to bound register bnd1.
66 0F 1B /r BNDMOV bnd1/m64, bnd2 MR NE/V MPX Move lower and upper bound from bnd2 to bnd1/m64.
66 0F 1B /r BNDMOV bnd1/m128, bnd2 MR V/NE MPX Move lower and upper bound from bnd2 to bound register bnd1/m128.

Instruction Operand Encoding

Op/En Operand 1 Operand 2 Operand 3
RM ModRM:reg (w) ModRM:r/m (r) N/A
MR ModRM:r/m (w) ModRM:reg (r) N/A

Description

BNDMOV moves a pair of lower and upper bound values from the source operand (the second operand) to the destination (the first operand). Each operation is 128-bit move. The exceptions are same as the MOV instruction. The memory format for loading/store bounds in 64-bit mode is shown in Figure 3-5.

BNDMOV to memory in 64-bit mode Upper Bound (UB) Lower Bound (LB) 0 16 8 Byte offset BNDMOV to memory in 32-bit mode Upper Bound (UB) Lower Bound (LB) 0 16 8 4 Byte offset

Figure 3-5. Memory Layout of BNDMOV to/from Memory

This instruction does not change flags.

Operation

BNDMOV register to register

DEST.LB := SRC.LB;
DEST.UB := SRC.UB;

BNDMOV from memory

IF 64-bit mode THEN
         DEST.LB := LOAD_QWORD(SRC);
         DEST.UB := LOAD_QWORD(SRC+8);
    ELSE
         DEST.LB := LOAD_DWORD_ZERO_EXT(SRC);
         DEST.UB := LOAD_DWORD_ZERO_EXT(SRC+4);
FI;

BNDMOV to memory

IF 64-bit mode THEN
         DEST[63:0] := SRC.LB;
         DEST[127:64] := SRC.UB;
    ELSE
         DEST[31:0] := SRC.LB;
         DEST[63:32] := SRC.UB;
FI;

Intel C/C++ Compiler Intrinsic Equivalent

BNDMOV void * _bnd_copy_ptr_bounds(const void *q, const void *r)

Flags Affected

None.

Protected Mode Exceptions

#UD

If the LOCK prefix is used but the destination is not a memory operand.

If ModRM.r/m encodes BND4-BND7 when Intel MPX is enabled.

If 67H prefix is not used and CS.D=0.

If 67H prefix is used and CS.D=1.

#SS(0) If the memory operand effective address is outside the SS segment limit.
#GP(0)

If the memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit.

If the destination operand points to a non-writable segment

If the DS, ES, FS, or GS segment register contains a NULL segment selector.

#AC(0) If alignment checking is enabled and an unaligned memory reference is made while CPL is 3.
#PF(fault code) If a page fault occurs.

Real-Address Mode Exceptions

#UD

If the LOCK prefix is used but the destination is not a memory operand.

If ModRM.r/m encodes BND4-BND7 when Intel MPX is enabled.

If 16-bit addressing is used.

#GP(0) If the memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit.
#SS If the memory operand effective address is outside the SS segment limit.

Virtual-8086 Mode Exceptions

#UD

If the LOCK prefix is used but the destination is not a memory operand.

If ModRM.r/m encodes BND4-BND7 when Intel MPX is enabled.

If 16-bit addressing is used.

#GP(0) If the memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit.
#SS(0) If the memory operand effective address is outside the SS segment limit.
#AC(0) If alignment checking is enabled and an unaligned memory reference is made while CPL is 3.
#PF(fault code) If a page fault occurs.

Compatibility Mode Exceptions

Same exceptions as in protected mode.

64-Bit Mode Exceptions

#UD

If the LOCK prefix is used but the destination is not a memory operand.

If ModRM.r/m and REX encodes BND4-BND15 when Intel MPX is enabled.

#SS(0) If the memory address referencing the SS segment is in a non-canonical form.
#GP(0) If the memory address is in a non-canonical form.
#AC(0) If alignment checking is enabled and an unaligned memory reference is made while CPL is 3.
#PF(fault code) If a page fault occurs.